.
CCNA 4 RSE CN Chapter 7 Practice Skills Assessment – Packet Tracer 100%

CCNA 4 RSE CN Chapter 7 Practice Skills Assessment – Packet Tracer 100%

CCNA Routing and Switching
Connecting Networks
Practice Skills Assessment SIC – Packet Tracer
A few things to keep in mind while completing this activity:
  1. Do not use the browser Back button or close or reload any exam windows during the exam.
  2. Do not close Packet Tracer when you are done. It will close automatically.
  3. Click the Submit Assessment button in the browser window to submit your work.

Introduction
In this practice skills assessment, you will configure the School Network with IPv4, point-to-point Frame Relay, OSPFv2, default routes and GRE tunnels.
All IOS device configurations should be completed from a direct terminal connection to the device console from an available host.
Some values that are required to complete the configurations may have not been given to you. In that case, create the values that you need to complete the requirements.
You will practice and be assessed on the following skills:
  • Configuration of IPv4 addressing
  • Configuration of point-to-point Frame Relay
  • Configuration of HDLC
  • Configuration of OSPFv2
  • Configuration of default routes
  • Configuration of a GRE tunnel
You are required to configure the devices as follows:

R1:
  • Configure IPv4 addressing.
  • Configure point-to-point Frame Relay on the appropriate interfaces.
  • Configure HDLC on the appropriate interfaces.
  • Configure OSPF for IPv4.
  • Configure passive interfaces.
  • Redistribute a default route.
  • Configure a GRE tunnel to R4.
R2:
  • Configure IPv4 addressing.
  • Configure point-to-point Frame Relay on the appropriate interfaces.
  • Configure OSPF for IPv4.
  • Configure passive interfaces.
R3:
  • Configure IPv4 and IPv6 addressing.
  • Configure Point-to-Point Frame-Relay on the appropriate interfaces.
  • Configure OSPF for IPv4 and IPv6.
  • Configure passive interfaces.
R4:
  • Configure IPv4 addressing.
  • Configure a GRE tunnel to R1.
  • Configure HDLC on the appropriate interfaces.
  • Configure an IPv4 default route to the Internet.

Tables
Addressing Table:
DeviceInterfaceIP Address
R1S0/0/0.2192.168.0.1/30
S0/0/0.3192.168.0.5/30
S0/0/1198.51.100.1/30
T0192.168.0.9/30
R2G0/010.2.0.1/24
S0/0/0.1192.168.0.2/30
S0/0/0.3192.168.0.13/30
R3G0/010.3.0.1/24
S0/0/0.1192.168.0.6/30
S0/0/0.2192.168.0.14/30
R4G0/010.4.0.1/24
S0/0/1203.0.113.1/30
T0192.168.0.10/30

Frame Relay Table:
DeviceInterfaceDLCI
R1S0/0/0.2122
S0/0/0.3123
R2S0/0/0.1221
S0/0/0.3223
R3S0/0/0.1321
S0/0/0.2322
ccna 4 cha7 skill
Instructions

All configurations must be performed through a direct terminal connection to the device consoles from an available host.
Step 1: Configure HDLC interfaces on R1 and R4.
Configure HDLC on the interfaces connected to the Internet. Use information from the Addressing Table. The interfaces should be configured for full connectivity.

Step 2: Configure Frame Relay.
Configure Frame Relay using the information from the Frame Relay Table.
  • Configure the IPv4 addressing of each sub-interface.
  • Configure the DLCI for each sub-interface.
Step 3:  Configure a GRE Tunnel between R1 and R4.
  • Configure a GRE tunnel, using Tunnel interface 0, that connects R1 with R4. Refer to the Addressing Table.
  • Configure a GRE tunnel, using Tunnel interface 0, that connects R4 with R1. Refer to the Addressing Table.
Step 4:  Configure OSPFv2.
  • Configure OSPF AS 1 area 0 on R1, R2, and R3.
  • Use the precise inverse mask for each network statement.
  • Only send OSPF updates out of the required interfaces.
  • Configure R1 to distribute a default route to the Internet.
Step 5:  Configure static and dynamic routing.
  • Create a next-hop default route to the Internet on R1.
  • Create a directly-attached default route to the Internet on R4.

hostname North (Central, R3)
int s0/0/0
encapsulation frame-relay
no shutdown
exit
int s0/0/0.2 point-to-point
ip add 192.168.0.1 255.255.255.252
frame-relay interface-dlci 122
no shutdown
exit
int s0/0/0.3 point-to-point
ip add 192.168.0.5 255.255.255.252
frame-relay interface-dlci 123
no shutdown
exit
int s0/0/1
encapsulation hdlc
ip add 198.51.100.1 255.255.255.252
no shutdown
exit
int T0
ip add 192.168.0.9 255.255.255.252
tunnel source s0/0/1
tunnel destination 203.0.113.1
no shutdown
exit
router ospf 1
network 192.168.0.0 0.0.0.3 area 0
network 192.168.0.4 0.0.0.3 area 0
network 198.51.100.0 0.0.0.3 area 0
passive-interface s0/0/1
default-information originate
exit
ip route 0.0.0.0 0.0.0.0 198.51.100.2
hostname East (Branch-1, R2)
int s0/0/0
encapsulation frame-relay
no shutdown
exit
int s0/0/0.1 point-to-point
ip add 192.168.0.2 255.255.255.252
frame-relay interface-dlci 221
no shutdown
exit
int s0/0/0.3 point-to-point
ip add 192.168.0.13 255.255.255.252
frame-relay interface-dlci 223
no shutdown
exit
int g0/0
ip add 10.2.0.1 255.255.255.0
no shutdown
exit
router ospf 1
network 10.2.0.0 0.0.0.255 area 0
network 192.168.0.0 0.0.0.3 area 0
network 192.168.0.12 0.0.0.3 area 0
passive-interface g0/0
exit
hostname West (Branch-2, R1)
int s0/0/0
encapsulation frame-relay
no shutdown
int s0/0/0.1 point-to-point
ip add 192.168.0.6 255.255.255.252
frame-relay interface-dlci 321
no shutdown
int s0/0/0.2 point-to-point
ip add 192.168.0.14 255.255.255.252
frame-relay interface-dlci 322
no shutdown
int g0/0
ip add 10.3.0.1 255.255.255.0
no shutdown
router ospf 1
network 10.3.0.0 0.0.0.255 area 0
network 192.168.0.4 0.0.0.3 area 0
network 192.168.0.12 0.0.0.3 area 0
passive-interface g0/0
exit
hostname South (Remote, R4)
int s0/0/1
encapsulation hdlc
ip add 203.0.113.1 255.255.255.252
no shutdown
exit
int T0
ip add 192.168.0.10 255.255.255.252
tunnel source s0/0/1
tunnel destination 198.51.100.1
no shutdown
exit
int g0/0
ip add 10.4.0.1 255.255.255.0
no shutdown
exit
ip route 0.0.0.0 0.0.0.0 s0/0/1

About

Next
« Prev Post
Previous
Next Post »
Subscribe to: Post Comments (Atom)